哈尔滨伸缩门_伸缩门厂家「电动伸缩门」-创隆伸缩门

「哈尔滨伸缩门」电动门试运行的步骤

1：使电动伸缩门处于半开状态，合上离合，接通电源。

Make the electric telescopic door in the half-open state, close the clutch and turn on the power supply

  2：调整位置检测开关与地面的垂直距离，使门运行过程中能够自动纠偏，用小发射器操作，按“开”按钮，门应朝开门方向运行

Adjust the vertical distance between the position detection switch and the ground so that the deviation can be corrected automatically during the operation of the door. Operate with a small transmitter and press the "Open" button. The door should run in the direction of opening the door.

  3：按“关”按钮，门应朝关门方向运行

Press the "close" button and the door should run in the direction of closing.

  4：按“停”按钮，门应停止运行

 

Press "Stop" button, the door should stop running

 

  5:关门时，若防撞开关前有障碍物时，门停止运行，并向开门方向运行,若发现纠偏动作与伸缩门的偏离方向相反时，将左右电机线对调。

 

When the door closes, if there is an obstacle in front of the anti-collision switch, the door stops running and runs in the direction of opening the door. If it is found that the correcting action is opposite to the deviation direction of the telescopic door, the left and right motor wires will be aligned.

选好门，上创隆.