您好,欢迎来到「哈尔滨伸缩门」-哈尔滨创隆门业的官方网站!本公司主营伸缩门,悬浮门,全自动升降柱,欢迎新老客户咨询,订购。

电话:

13940183063

当前位置:主页 > 伸缩门资讯 > 行业资讯 >

「佳木斯伸缩门」无轨伸缩门滑轮更换

作者:艾经理发布时间:2019-08-20 14:14

佳木斯伸缩门无轨伸缩门滑轮更换
 


 
  电动无轨道的伸缩门的主要特点是不会在原来的地面上开凿破坏地面,保持了原来的场地的完整度就可以安装。不过,因为长年累月的伸缩运动使用过后,伸缩门的滑轮很容易出现磨损,导致后面门体无法正常移动,这种情况下,就应该对损坏的滑轮进行换新,保持伸缩门正常运行,避免出现事故。

 
 


The main feature of the electric trackless telescopic door is that it will not cut and destroy the ground on the original ground, and can be installed with the integrity of the original site. However, the pulley of the telescopic door is easy to wear and tear after years of telescopic movement, which results in the back door body unable to move normally. In this case, the damaged pulley should be renewed to keep the telescopic door running normally and avoid accidents.

 


 
  在更换滑轮的时候,尽量选择专业人士或者原来安装的厂家,这样更换比较仔细,还能看下是否有其他问题,如果伸缩门还在保修期内,可以找厂家过来重新安装或者寄轮子配件过来。不过找人上门安装,可能需要费用也是蛮高的,有时候可能比轮子的费用还高。如果是让厂家发货过来,自己安装的话,这样费用会低点,这种情况适用于只是坏少数轮子的情况。
 


 
When replacing pulleys, try to choose professionals or original manufacturers, so that the replacement is more careful, but also see if there are other problems, if the expansion door is still under warranty, you can find manufacturers to reinstall or send wheel accessories. However, the cost of door-to-door installation may be quite high, sometimes higher than the cost of wheels. If the manufacturer delivers the goods and installs them by himself, the cost will be lower. This situation applies to the case of only a few bad wheels.



 
 伸缩门

 

  不锈钢无轨伸缩门的轮子的固定方式大概很多种,大部分是用卡簧固定要不锈钢的轴套上面,拆除这样的轮子的时候,需要先把滑轮侧面的小盖揭开,直接用卡簧夹将卡簧撑掉,这样滑轮是可以轻松的拆下来,如果滑轮的连接配件生锈,可以用机油或者除锈的处理下,在拆下来。另外一种滑轮的固定方式,就是直接在侧面用螺丝固定,直接拧出螺丝就可以更换了。
 
 
There are many ways to fix the wheels of stainless steel trackless telescopic doors. Most of them are fixed on stainless steel sleeves with clip springs. When removing such wheels, it is necessary to first uncover the small cover on the side of the pulley and directly use clips to pull the clip springs off, so that the pulley can be easily dismantled if the pulley is connected. The parts are rusty and can be removed with oil or rust removal. Another way to fix the pulley is to fix it directly on the side with a screw, which can be replaced by twisting out the screw directly.
 
 
 
  伸缩门的滚轮常见规格:直径是125mm的铝芯橡胶机头轮,内孔规格有18mm,23mm,20mm;轮胎是PVC材料.
 
 
Common specifications of rollers for telescopic doors: aluminium rubber nose wheel with diameter of 125 mm, inner hole specifications of 18 mm, 23 mm and 20 mm; tire is made of PVC material




选好门,上创隆。

上一篇:「佳木斯悬浮门」悬浮门原理和优势

下一篇:「佳木斯伸缩门」伸缩门特色寿命

推荐新闻: